Unit converters

Length mass volume and temperature unit converter

Convert within four measurement categories with exact declared factors and the necessary temperature offsets.

Your numbers

Calculated on your device. Your inputs aren’t sent to us.

Your result

Ready when you are

Enter your inputs and select Calculate.

Report an issue

Try it, understand it

Explore the result

Compare these worked scenarios while keeping the units and assumptions visible.

Worked example comparison
ExampleOutputWhat to notice
Metres to international feetConverted value3.28084 International feetDivide one metre by the exact 0.3048 factor.
Absolute temperature offsetConverted value32 FahrenheitZero Celsius becomes thirty-two Fahrenheit.
US liquid gallonConverted value3.785412 LitresOne US gallon is 3.785411784 litres.

Check your understanding

Can I convert kilograms directly to litres?

Not without a density or other material relationship.

Does zero Celsius convert to zero Fahrenheit?

No. Absolute scale conversion includes an offset.

Behind the numbers

How this calculation works

Select the measurement category first so incompatible dimensions cannot be paired. Length uses metres as its basis, mass kilograms and volume cubic metres. The Celsius–Fahrenheit–kelvin branch applies offsets as well as scale factors. US liquid and imperial gallons have distinct labels and values; mass ounces and fluid ounces are never treated as the same quantity.

THE FORMULAMultiplicative units: value × source factor / target factor; absolute temperatures also require scale offsets

A worked example

One metre is 1/0.3048 = 3.280839895 international feet. One US liquid gallon is exactly 3.785411784 litres. An absolute temperature of 0 °C is 32 °F and 273.15 K; multiplying zero by a single unit ratio would not produce those scale readings.

Good to know

Measurement conversion only, with international foot/mile and avoirdupois mass conventions. No currency conversion, US survey foot, density-dependent mass/volume conversion or temperature-difference mode. Absolute values below zero kelvin are rejected; other signed quantities remain arithmetic conversions.

A conversion cannot turn one dimension into another

Length, mass and volume have different dimensions. One kilogram cannot be converted into litres without additional information about density. The mass density and volume calculator handles that separate relationship instead of pretending it is a unit-factor lookup.

The two original indexed converter tasks are combined here with every original category: length, mass, volume and temperature. US liquid gallons, quarts, pints and fluid ounces are explicitly distinguished from imperial gallons. An ounce of mass is not a fluid ounce of volume, even when the same everyday word appears in both labels.

Temperature scales need an offset as well as a ratio

For absolute temperatures, zero Celsius corresponds to thirty-two Fahrenheit and 273.15 kelvin. Multiplying by a factor alone would leave zero unchanged and fail that check. A temperature difference uses another conversion rule, so this page explicitly handles absolute readings rather than claiming to convert both kinds with one formula.

An international foot is exactly 0.3048 metre; a mile contains 5,280 such feet. The height converter provides a dedicated feet-and-inches entry when that written form is more convenient. This page uses an international-foot convention rather than the historical US survey foot, and it rejects absolute temperatures below zero kelvin.

A few questions, answered

Can I convert kilograms directly to litres?

Not without a density or other material relationship.

Does zero Celsius convert to zero Fahrenheit?

No. Absolute scale conversion includes an offset.

Are US and imperial gallons identical?

No. They have different exact litre values.

Find your calculator

Start typing to explore the library.