How this calculation works
Convert height to inches and subtract the five-foot reference. Devine adds 2.3 kg for each additional inch to its selected base. Hamwi uses 106 lb plus 6 lb per inch for male coefficients, or 100 lb plus 5 lb for female coefficients. Separately multiply height in metres squared by BMI boundaries 18.5 and 25 to display general reference weights.
Devine: 50/45.5 kg + 2.3 kg per inch above five feet; Hamwi uses a different pound-based equationA worked example
At 177.8 cm, height is 70 inches, ten inches above the reference. Devine male coefficients give 50+2.3×10 = 73 kg. Hamwi gives 166 lb, or 75.29633342 kg. These different formulas do not determine one uniquely ideal weight.
Good to know
Historical formulas are displayed only at heights of at least 152.4 cm. General BMI boundaries are not personalized healthy-weight targets, and the upper 25 boundary is exclusive. This tool is not suitable for medication dosing, pregnancy targets or pediatric growth assessment.
Reference: Primary research: historical ideal body weight equations (opens in a new tab) ↗
Historical formulas do not define one ideal person
Devine and Hamwi assign different base values and different increments above five feet. The same height can therefore produce two different outputs without either calculation containing an arithmetic error. Their historical names should not be read as proof that one exact weight is healthy or appropriate for every person of that height.
This page corrects the old confusion between the names and coefficients. Devine uses kilograms; Hamwi starts in pounds and is converted with the exact pound-to-kilogram factor. The height converter helps verify how many inches exceed the reference height before either increment is applied.
Keep formula comparison separate from BMI boundaries
The general adult BMI references are calculated independently as BMI times height in metres squared. The upper boundary is 25 and is exclusive for the interval ending below 25; a displayed boundary weight should not be described as an inclusive maximum. The BMI calculator provides the separate ratio for a given weight.
Below five feet, this tool withholds the historical formula values rather than extrapolating unsupported downward increments. It still shows the explicitly labeled general BMI boundary arithmetic. Pregnancy, age, composition and clinical circumstances complicate interpretation, so neither the formula comparison nor the reference interval is presented as a personal target or a medication-dose weight.
A few questions, answered
Why can Devine and Hamwi disagree?
Their bases, increments and original units differ.
Why are the historical outputs withheld below 152.4 cm?
This tool does not extrapolate those formulas below their five-foot reference.
Is the BMI 25 boundary included in a below-25 interval?
No. It is an exclusive upper boundary.