Shapes & spaces

Overlap area of two circles calculator

Find the intersection area of two discs, including disjoint and contained cases.

Your numbers

Calculated on your device. Your inputs aren’t sent to us.

Your result

Ready when you are

Enter your inputs and select Calculate.

Report an issue

Behind the numbers

How this calculation works

At a centre distance equal to the sum of the radii, the circles touch at a point and their intersection area is zero.

THE FORMULAPartial overlap = sum of two circular sectors minus two triangles

A worked example

A radius-1 disc with its centre 0.5 from a radius-2 disc is fully contained. The overlap is π.

Good to know

Use the same length unit for the radii and centre distance.

Classify separation before evaluating circular segments

Two discs are disjoint when their centre distance d is at least the sum R + r. Their intersection then has zero area. If d is at most |R − r|, the smaller disc is fully contained and the intersection area is π times the smaller radius squared.

The defaults R = 2, r = 1 and d = 0.5 satisfy 0.5 ≤ 1, so the entire smaller disc is inside the larger and the overlap is π. The first diagram shows this contained case. The second shows a partial lens, where neither disc contains the other.

A contained disc and a partial lens require different overlap casesContained → πPartial lens ≈ 1.22837
Left: default R = 2, r = 1, d = 0.5 gives overlap π. Right: two unit discs one unit apart give 2π/3 − √3/2.

Add two sectors and subtract their triangles

In a partial overlap, the common chord divides the lens into two circular segments. For each circle, the segment equals sector area minus the isosceles triangle area. The cosine rule supplies the half-sector angle α = arccos[(d² + R² − r²)/(2dR)]. Its segment area is R²(α − sin(2α)/2), with α in radians. Add the corresponding term from the other circle.

For two unit circles one unit apart, the result is 2π/3 − √3/2, approximately 1.22837. The Circle radius from chord and sagitta calculator explores a related circular-segment construction. Concentric circles are handled by the containment branch, which avoids division by a zero centre distance. All three lengths must share units, and the result uses square units.

A few questions, answered

Does swapping the radii change the overlap?

No. The intersection is symmetric in the two discs, even though the two sector contributions can differ.

Do externally tangent circles have positive overlap area?

No. They share one boundary point, which has zero area.

Find your calculator

Start typing to explore the library.