Shapes & spaces

Circle radius from chord and sagitta calculator

Recover the radius of a circular arc from its chord and midpoint rise.

Your numbers

Calculated on your device. Your inputs aren’t sent to us.

Your result

Ready when you are

Enter your inputs and select Calculate.

Report an issue

Behind the numbers

How this calculation works

For a fixed chord, a shallower minor arc gives a larger radius. A sagitta equal to half the chord describes a semicircle.

THE FORMULAR = c²/(8h) + h/2

A worked example

A chord of 8 with a rise of 2 belongs to a circle of radius 5.

Good to know

Measure the sagitta perpendicular to the chord.

Build a right triangle from half the chord

A chord’s perpendicular bisector passes through the circle centre. Let the full chord length be c and the rise from its midpoint to the selected arc midpoint be h. The half-chord has length c/2. Pythagoras gives (R − h)² + (c/2)² = R², which rearranges to R = c²/(8h) + h/2.

With c = 8 and h = 2, the result is 64/16 + 1 = 5. The centre lies 3 units below the chord and each half-chord is 4 units long. Their right triangle has sides 3, 4 and 5. The SVG marks the rise to the upper arc and the full chord width.

An eight-unit chord and two-unit rise form a three-four-five radius triangleh = 2Chord = 834R = 5O
The worked example has radius 5, half-chord 4 and centre-to-chord distance 3. The rise to the upper arc is 2.

Identify the chosen arc and the measurement sensitivity

A chord belongs to two arcs. For a radius-5 circle with chord 8, the smaller rise is 2 and the rise towards the opposite arc midpoint is 8. Either value returns the same radius. A rise equal to half the chord describes a semicircle, where the chord is a diameter.

For a shallow arc, the term c²/(8h) dominates, so a small error in h can strongly affect the recovered radius. Measure the sagitta perpendicular to the chord, not along the curve. The Circle tangent length from an external point calculator uses the radius in another right-triangle construction. Enter lengths in one unit and use a positive rise. A rise of zero cannot describe a finite-radius circular arc with a positive chord.

A few questions, answered

Is chord length the same as arc length?

No. The chord is the straight segment joining the endpoints. Arc length follows the curved boundary.

Can the rise exceed half the chord?

Yes. It then selects the larger arc between the chord endpoints.

Find your calculator

Start typing to explore the library.