Science & engineering

Heat index calculator for temperature and humidity

Estimate the NWS shade heat index from temperature and relative humidity with the published humidity adjustments.

Your numbers

Calculated on your device. Your inputs aren’t sent to us.

Your result

Ready when you are

Enter your inputs and select Calculate.

Report an issue

Try it, understand it

Explore the result

Estimate the NWS shade heat index from temperature and relative humidity with the published humidity adjustments.

Worked example comparison
ExampleOutputWhat to notice
Worked exampleShade heat index99.677718 °FAt 90 °F and 60% relative humidity, the modeled shade heat index is about 99.68 °F.
Hotter and more humidShade heat index122.613041 °FBoth inputs can increase the modeled heat burden.

Check your understanding

Why does the formula sometimes use a simpler calculation?

The full regression is intended for hotter conditions. The NWS first evaluates a simpler approximation and uses it when the threshold is not reached.

What does the “Hotter and more humid” setting illustrate?

Both inputs can increase the modeled heat burden.

Behind the numbers

How this calculation works

Humidity limits how effectively sweat can evaporate. This calculation first tests the simplified NWS estimate, then applies the full regression and documented adjustments in the appropriate warm conditions.

THE FORMULAUse the NWS initial estimate and switch to the Rothfusz regression at 80 °F, with low- and high-humidity adjustments where applicable.

A worked example

At 90 °F and 60% relative humidity, the modeled shade heat index is about 99.68 °F.

Good to know

Shade model, with a supported temperature range of 60 to 120 °F. Full sun, workload and local conditions can increase heat stress. Follow official heat alerts.

How the inputs affect the result

Use temperature and relative humidity measured for the same place and time. For planning outdoor work, check the local heat advisory and applicable work-rest guidance.

Both inputs can increase the modeled heat burden.

Where the calculation applies

Shade model, with a supported temperature range of 60 to 120 °F. Full sun, workload and local conditions can increase heat stress. Follow official heat alerts.

For a related calculation, see the Surface condensation and dew point calculator.

A few questions, answered

Why does the formula sometimes use a simpler calculation?

The full regression is intended for hotter conditions. The NWS first evaluates a simpler approximation and uses it when the threshold is not reached.

What does the “Hotter and more humid” setting illustrate?

Both inputs can increase the modeled heat burden.

Find your calculator

Start typing to explore the library.