Shapes & spaces

Triangle SSA ambiguous case calculator

Determine whether two sides and a non-included angle give zero, one, or two triangles.

Your numbers

Calculated on your device. Your inputs aren’t sent to us.

Your result

Ready when you are

Enter your inputs and select Calculate.

Report an issue

Behind the numbers

How this calculation works

Both an acute angle and its supplement have the same sine. A candidate is possible only if there is room left for the third angle.

THE FORMULAUse sin(B) = b sin(A)/a and test both B and 180°−B

A worked example

With A=30°, a=7 and b=10, both angles with sin(B)=5/7 leave a positive third angle.

Good to know

Near a tangency, classification depends on numerical precision.

Test both angles with the same sine

With A = 30 degrees, opposite side a = 7 and other side b = 10, the sine rule gives sin B = b sin A/a = 5/7. The inverse sine returns about 45.585 degrees, but its supplementary angle, about 134.415 degrees, has the same sine.

Both candidates leave a positive third angle. Their C values are about 104.415 and 15.585 degrees. Applying c = a sin C/sin A gives approximately 13.559 and 3.761 for the remaining side. The SVG constructs both possibilities from a shared vertex and side b, with two circle intersections on the same ray.

Two points on the baseline can complete a triangle with a thirty-degree angle and sides seven and tenACB₁B₂30°b = 10a = 7Same angle A, two valid baseline endpoints
A = 30°, a = 7 and b = 10 admit two triangles. The two possible baseline lengths are about 3.761 and 13.559.

Use the altitude threshold to understand ambiguity

For an acute known angle A, the perpendicular altitude b sin A is the minimum opposite side that reaches the ray. In the example it is 5. An a below 5 gives no triangle, a equal to 5 gives one right triangle, and 5 < a < 10 gives two triangles. At a = 10 only one nondegenerate triangle remains.

For an obtuse known angle, the opposite side must exceed the other known side, and at most one triangle exists. Testing A + B < 180 degrees handles these cases without accepting a flat triangle. The Triangle angle bisector length calculator becomes useful after a complete triangle has been identified. Near tangency, rounded input and numerical tolerance can affect whether one or two intersections are distinguished.

A few questions, answered

Why does an inverse sine miss a possibility?

Its principal output covers only one angle. Angles B and 180° − B have equal sine, so both need a triangle-angle check.

Is SSA always ambiguous?

No. Depending on the angle and lengths it can give zero, one or two triangles.

Find your calculator

Start typing to explore the library.