Maths & numbers

Successive percentage changes calculator

Combine consecutive changes that each apply to the latest amount.

Your numbers

Calculated on your device. Your inputs aren’t sent to us.

Your result

Ready when you are

Enter your inputs and select Calculate.

Report an issue

Behind the numbers

How this calculation works

The second change uses the new base. A 20% loss after a 20% gain removes 24 units when the original amount was 100.

THE FORMULA100 × [(1+p/100)(1+q/100)(1+r/100) − 1]

A worked example

A 20% increase followed by a 20% decrease leaves 96% of the original.

Good to know

Enter reductions as negative percentages.

Multiply the growth factors in order

Start with 100 units. A 20% rise multiplies it by 1.20, producing 120. A 20% decrease then multiplies the new value by 0.80, producing 96. The third default change is zero, with factor 1.00. The final value is 96% of the original, so the net change is −4%.

The second decrease removes 24 units because its base is 120. It therefore removes more than the first rise added. Adding the signed percentages would give zero and miss this change of base. The general calculation multiplies (1 + p/100), (1 + q/100) and (1 + r/100), then subtracts one and converts to a percentage.

A starting amount of 100 becomes 120 after a twenty percent rise and 96 after a twenty percent fallStart100+20%120−20%96Net change = −4%
The 20% reduction applies to 120. It removes 24 units and leaves the final amount four units below the start.

Check reversals and complete losses

Recovering from a 20% decrease requires a 25% increase. After 100 falls to 80, the missing 20 is one quarter of 80. This illustrates why equal-magnitude gains and losses do not cancel. For fixed percentage factors the final product is unchanged by reordering, although the intermediate amounts can differ.

A change of −100% contributes a factor of zero, so every later finite percentage multiplier leaves the amount at zero. The calculator excludes decreases below −100%, which would create negative factors and a different interpretation. The Percentage point change calculator compares rates directly. This tool instead treats each rate as a multiplier applied to the latest amount.

A few questions, answered

What should I enter when there are only two changes?

Leave the third change at zero. Its multiplier is one, which preserves the result of the first two changes.

Can this model fees taken as fixed amounts?

It models percentage multipliers. A fixed currency fee requires an explicit amount and subtraction at the correct step.

Find your calculator

Start typing to explore the library.