Maths & numbers

Percentage mix target calculator

Solve how much of each mixture is needed to reach a target mass percentage.

Your numbers

Calculated on your device. Your inputs aren’t sent to us.

Your result

Ready when you are

Enter your inputs and select Calculate.

Report an issue

Behind the numbers

How this calculation works

When the target equals one stock concentration, the entire final mass comes from that stock.

THE FORMULAHigh mass = total mass × (target − low)/(high − low)

A worked example

A 200-unit mix at 25% uses 100 units each of 10% and 40% stocks.

Good to know

Use mass fractions and assume masses add.

Balance the amount of the measured component

To prepare 200 mass units at 25% using stocks at 10% and 40%, let H be the mass of the stronger stock. The weaker-stock mass is 200 − H. The measured component contributes 0.40H + 0.10(200 − H), which must equal 0.25 × 200 = 50.

Expanding gives 0.30H + 20 = 50, so H = 100. The remaining 100 units come from the weaker stock. These contribute 40 and 10 component units respectively, totaling 50 in 200, or 25%. Equal stock masses work here because the target is halfway between the stock concentrations.

One hundred mass units of ten percent stock plus one hundred of forty percent stock produce two hundred of twenty-five percent mixture100 at 10%+100 at 40%10 component40 component(10 + 40) / 200 = 25%
The two stock masses contribute 10 and 40 units of the measured component. Together they contribute 50 in a total mass of 200.

Use the same concentration basis for both stocks

For a target of 20% with the same stocks and total mass, the high-stock mass is 200 × (20 − 10)/(40 − 10) ≈ 66.67. The weaker stock supplies about 133.33. As the target approaches the stronger stock’s concentration, the required share of stronger stock approaches the full mass.

The target must lie between the two stock concentrations, and the stronger stock must have a strictly greater concentration. This model balances mass fractions with additive masses. Volume fractions can require density or contraction information. The Percentage of a percentage calculator helps check the component mass within an individual stock, such as 40% of 100 mass units. Use consistent mass units throughout the mixture calculation.

A few questions, answered

What happens at a stock concentration endpoint?

A target equal to the weaker stock requires zero stronger stock. A target equal to the stronger stock requires zero weaker stock.

Can the stocks have equal concentrations?

The general mixing equation divides by their concentration difference. This tool requires distinct concentrations. Equal stocks could only produce that same concentration.

Find your calculator

Start typing to explore the library.