Home & construction

Gravel quantity calculator

Estimate volume and mass from a rectangular area and bulk density.

Your numbers

Calculated on your device. Your inputs aren’t sent to us.

Your result

Ready when you are

Enter your inputs and select Calculate.

Report an issue

Try it, understand it

Explore the result

Compare these worked scenarios while keeping the units and assumptions visible.

Worked example comparison
ExampleOutputWhat to notice
Metric bulk quantityEstimated material mass3.2 tonnesThe example volume is 2 m³ and mass is 3.2 tonnes.
Original imperial workflowEstimated material mass2.799953 tonnes20 by 10 ft at four inches deep, density 2,500 lb/yd³.
No fill depthEstimated material mass0 tonnesZero depth produces zero volume and mass.

Check your understanding

Are US short tons the same as metric tonnes?

No. One is 2,000 lb; the other is 1,000 kg.

Is depth in feet in imperial mode?

No. Length and width are feet, while depth is inches.

Behind the numbers

How this calculation works

Use the bulk density supplied for the actual material and condition, including voids between particles. The example density is an editable assumption, not a specification for all gravel.

THE FORMULAVolume = length × width × depth; tonnes = volume × density ÷ 1,000

A worked example

A 5 × 4 m area filled 0.1 m deep has volume 2 m³; at 1,600 kg/m³ the mass is 3.2 tonnes.

Good to know

No automatic compaction or waste factor. Moisture and compaction alter bulk density; confirm ordering quantities with the supplier.

A little curiosity

Bulk density includes the spaces between particles

A pile’s bulk density is not the same as the density of an individual solid stone. The spaces between particles affect how much mass fits into a given volume, and moisture or compaction can change the result.

The default 1,600 kg/m³ is only an editable example. Using the supplier’s value for the actual material and condition is more defensible than assuming all gravel has one universal density.

Depth needs the same length system as the footprint

A 100 mm layer is 0.1 m deep. Across 20 m², that gives 2 m³, and at the example density the mass is 3.2 metric tonnes. Entering 100 as metres would make the estimate a thousand times too large.

The tool has no automatic waste or compaction correction. If ordered loose material must achieve a compacted thickness, establish the appropriate conversion with the supplier and project specification.

Depth must join the same length system

A bed described in feet, feet and inches cannot be multiplied directly to obtain cubic feet. Divide inch depth by twelve first, then divide cubic feet by twenty-seven for cubic yards. In metric mode, all three lengths are metres. The selected system changes the meaning of the density field too, so switching units does not convert previously typed numbers automatically.

Imperial mode uses pounds per cubic yard because that matches the original indexed task. The normalized output also reports metric tonnes. A US short ton contains 2,000 pounds; a metric tonne contains 1,000 kilograms. They are different mass units, not alternative spellings of the same truckload.

Ordering mass needs a supplied bulk density

The mass density and volume calculator shows the underlying multiplication in normalized units. For loose material, use bulk density for the actual moisture and packing state rather than the density of a solid mineral sample. A denser material at the same geometric volume produces a larger mass estimate.

No compaction or waste factor is hidden in the result. If a supplier recommends an ordering adjustment, establish how it relates to the installed volume before applying it. The mulch soil calculator instead rounds an entered bulk volume into bags; bag count and truckload mass are distinct purchasing questions.

A few questions, answered

Are these metric tonnes?

Yes. One tonne is 1,000 kg.

Does it include compaction?

No. The result follows the volume and bulk density you enter, without an additional compaction factor.

Are US short tons the same as metric tonnes?

No. One is 2,000 lb; the other is 1,000 kg.

Is depth in feet in imperial mode?

No. Length and width are feet, while depth is inches.

Does the tool add compaction automatically?

No. The geometric volume is used without a hidden allowance.

Find your calculator

Start typing to explore the library.