Maths & numbers

Finite arithmetic geometric series calculator

Add a finite series whose arithmetic term is weighted by a geometric multiplier.

Your numbers

Calculated on your device. Your inputs aren’t sent to us.

Your result

Ready when you are

Enter your inputs and select Calculate.

Report an issue

Behind the numbers

How this calculation works

If the arithmetic step is zero, the weights form an ordinary finite geometric series multiplied by the first term.

THE FORMULAS = Σ(a + kd) rᵏ for k = 0,…,n−1

A worked example

1 + 2/2 + 3/4 + 4/8 = 3.25.

Good to know

The first term has geometric weight 1.

Multiply each arithmetic term by its geometric weight

With initial term 1, arithmetic step 1, geometric ratio 1/2 and four terms, the weighted terms are 1 × 1, 2 × 1/2, 3 × 1/4 and 4 × 1/8. Their values are 1, 1, 0.75 and 0.5. Adding them gives 3.25.

The indexing begins at k = 0, so the general term is (a + kd)rᵏ. The exponent for the fourth term is three. The SVG displays each arithmetic numerator and its corresponding power-of-two divisor to make that indexing visible.

Four arithmetic factors multiplied by decreasing weights sum to three point two five1k = 02/2k = 13/4k = 24/8k = 31 + 1 + 0.75 + 0.5 = 3.25
The four terms are 1, 2/2, 3/4 and 4/8. The arithmetic factor grows while the geometric weight halves.

Use finite-sum identities as independent checks

When r = 1 every geometric weight equals one. The total then reduces to the arithmetic-series formula na + dn(n − 1)/2. When d = 0 the sum becomes a finite geometric series. For r different from one, its total is a(1 − rⁿ)/(1 − r). These substitutions provide useful checks on the general calculation.

Zero terms give the empty sum zero. With at least one term and r = 0, the first weight is defined as one and the later weights vanish, leaving a. Negative ratios alternate signs and remain valid for a finite sum. The Infinite geometric series sum calculator addresses a different question about a limiting total, where convergence conditions become essential.

A few questions, answered

Is the arithmetic step also multiplied repeatedly?

No. The arithmetic factor increases by d each time, while the geometric factor is multiplied by r.

Why can a ratio above one be accepted?

The number of terms is finite. No convergence claim is needed, although large powers can exceed numerical range.

Find your calculator

Start typing to explore the library.